Browse our collections and find your perfect floor.
A clear guide to preparation, fitting, underfloor heating, care and warranty cover for BML waterproof flooring.
Check the flooring, prepare the space properly and make sure the subfloor is ready before installation starts.
Do not remove old resilient flooring without checking first. Some older materials may contain harmful substances.
Begin in a corner with the tongue side facing the wall and leave the correct expansion gap with spacers.
Lock the next plank carefully into place and tap joints lightly until the boards sit flat.
Mark the final piece accurately, cut it to size and fit it back into position.
Use off-cuts where possible and keep joints staggered for a balanced, professional layout.
Engage the side joint first, lower the board and lock the end joint carefully into place.
Measure against the wall, allow for the expansion space and cut the final row neatly to size.
Mark all cut-outs carefully and leave enough space around fixed obstacles and vent openings.
Trim frames to the correct height so the flooring slides underneath cleanly, then remove spacers at the end.
Some nails, fasteners and solvent-based adhesives can cause staining or discolouration. Always use suitable installation products.
For 25 years from purchase, the floor is covered against manufacturing defects and qualifying wear or staining when installed and maintained correctly.
The light commercial warranty applies to selected lower-traffic commercial spaces such as hotel rooms or cafés.
The right preparation protects the finish, the performance and the warranty. Our team can help you check subfloors, fitting conditions and the next steps before work begins.
